It has never been so easy to record and re-watch exclusive moments of your life. The 4K resolution means that you capture footage in stunning detail. 2” LCD screen makes the watching of these videos super pleasant and comfortable. Besides, it has specially designed waterproof case allowing to film fascinating videos up to 30 Metres under the water!
Please Note: You will need to buy a MicroSD card separately, the MicroSD card should be Class 10 UHS-1 or higher, up to and including a 64GB memory card. For High Speed footage we recommend the 1080p 60fps setting and only use Genuine branded CLASS 10 Memory cards such as Sandisk, Samsung or Kingston.
Languages supported: English / Traditional Chinese / Simplified Chinese / Japanese / French / German / Spanish / Italian / Portuguese / Thai / Russian / Korean.
Dimensions 59,3 (L) x 41,1 (H) x 24,6 (D) mm
Connectivity Micro USB
Output: Micro HDMI
Type Action / Sports camera
Display 2" LCD (320 x 240 pixels)
Audio Audio Format: PCM
Bit rate: 176 kbps
Channels: mono sound
Speaker and microphone built-in
Weight 58 grams (battery included)
Battery Rechargeable Li-ion 900mah *Charging time: 4 hours from a USB power supply
Video Resolution: 4K 30FPS (3840*2160) / 4K 30FPS (3200*1800) / 2.7K 30FPS (2688*1520) / 1080P 60FPS /30FPS (1920*1080) / 720P 120FPS (1080*720) (MJPG) .AVI file format
Still image resolution Up to 20 megapixels
External memory: Micro-SD card up to 64GB (Class 10 is recommended)
Optional Loop Recording: 10 minute intervals
Whats In The Box:
30M Waterproof case
Helmet mounts with 3M adhesive tape
USB to Micro USB charging cable
x1 900 mah Rechargeable Lithium Ion Battery
Waterproof Housing Preparation
Before taking your EvoDX underwater, or using it around water-based activities such as Kayaking, Windsurfing, Swimming, Surfing etc, Take the time to ensure that the rubber seal on the rear door is in good condition (not pinched, nicked or frayed) and is free from any hairs, dirt or other foreign matter that can cause the seal to fail and water ingress to occur. Also ensure that the housing grooves in which the rubber seal sits, are equally free of any dirt, hair or foreign matter and that no damage or scratching has occurred to those grooves. A very small amount of silicon grease applied sparingly to the rubber seal will assist in providing a water-tight seal.
This level of preparation applies to all waterproof cases and equipment, not just the EvoDX housings - so if you have other waterproof kit - take the time to check it thoroughly before you use it in very wet environments, so you do not allow water ingress to potentially damage your equipment.